Honda Acura PhatBox Digital Media Player Quick Start Guide

1. Turn off the car.
2. Gain access to the rear portion of your car stereo.
3. Plug the PhatNoise connector cable into the port on the rear of the car stereo. Depending on your stereo you should have either a round connector A or a rectangular connector B
4. Secure the PhatBox to a flat mounting location parallel or perpendicular to the floor of the car with the four included selftapping screws
5. Fully insert the cartridge into the front
6. Plug the PhatNoise cable into the back of the PhatBox
7. The red and green lights should turn on
8. Approximately 5 seconds later, both lights should be off and stay off.
9. Turn on your stereo (usually by turning the key to ACC).
10. Switch to CD changer mode on your stereo by pressing the CD changer button. CD should appear on the display.
11. Wait up to 15 seconds for a welcome message to play.
12. Congratulations! The PhatNoise PhatBox is installed and ready to be used. Turn off the stereo and remove the cartridge. Setting up at home
Installing the PhatNoise PhatBox of the PhatNoise Music Manager Software
here