2000-2006 Hyundai Accent 1.3 L L4 air filter Element Setup Guide

Hyundai manuals for air filter L L4 2000-2006 hyundai Accent 1.3 installation manual.
1. the air inlet hose Unclip the. (Fig. 1) 2. unscrew the hexagon and remove the intake snorkel/resonator box from the vehicle. (Fig. 2) 3. remove the 3 screws, secure the field of air into the vehicle. (Fig 3) 4. Carefully lift the entire field of air from the vehicle. (Fig 4) 5. remove the breather hose from inlet hose. (Fig 5) 6. unscrew the hexagon and remove inlet hose/resonator box from the throttle body. (Fig 6) 7. Mount the hose tapered bore throttle body with silicone, using a clamp hose # 36 delivered. (Fig 7) 8. Screw Adapter with plastic hose, plastic molded tube. (Fig 8) 9. Fit the filter Adapter plastic molded rubber tube. (Fig. 9) 10. Adjust a filter on the filter Adapter charger rubber hose supplied with the belt. (Fig 10) 11. Adjust the Assembly around the inlet hose silicone tapered bore, using a hose clamp # 48, delivered. (Fig. 11) 12. Breather hose fit over the plastic hose Adapter, using a clamp hose # 4, delivered. (Fig 12) 13. Remove the CAP from one end of the cold air hose, flexible and ovalize for this purpose. (Figure 13) 14. The feed end of the cold air hose ovalized flexi down to the front bumper, through the space next to the radiator. (Figure 14), 15. Position of the other quit about 4/10 cm distance from the filter element and secure it to the battery positive cable using plastic tie supplied. (Fig. 15) 16. Carry out the final amount of the check alignment Kit/Setup was completed.
Download