Tuesday, May 24, 2011

Installation Guide-removing 2004 Cadillac CTS-V exhaust system

Cadillac manuals for 2004 Cadillac CTS-V exhaust removal system setup guide.
Installation instructions for the removal of exhaust system:
Remove the exhaust system: 1. using 15 mm socket or wrench, remove the flange four nuts. Note: remember to save all the nuts, bolts, rubber insulators and cross brace removed from the vehicle. They will be used to install exhaust CORSA performance in later stages.

Manual installation of Mount 2007 Chevrolet Tahoe/Suburban/Avalanche Grille Guard/Winch

Chevrolet/Chevy manuals for 2007 Chevrolet Tahoe/Suburban, Avalanche Grille Guard/winch mount manual installation.
Installation instructions for the Mount Guard/winch grille:
1. temporarily install the bottom bracket on the passenger side frame using

1995-1996 Chrysler Sebring short throw Shifter Setup Guide

Chrysler manuals for 1995-1996 Chrysler Sebring short throw Shifter Setup Guide.
Short throw Shifter Setup instructions:
List of parts: 1 B and M short Throw Shifter, 1 B and M short Throw Shifter Pivot Pin, 1 Shift, 1 5/16 "-18 screw, 1 E-Clip (2 supplied 1 required), 2 washers, nylon, 1 tube, Loctite, 1 sheet of instructions.
The B and M short Throw Shifter was designed to work on most models 1995-1996 Chrysler manual gearbox.

Manual installation of the 2008-2009 Chrysler 300 C, eight-channel Amp

Chrysler manuals for 2008-2009 Chrysler 300 C Manual installation Amp eight channel.
Eight channel Amp installation instructions:
1. use the removal tool trim piece that gently Panel loose between the driver's side front door and trailing. 2. the use of that tool in Removing the Panel up to the threshold/kick Panel across the bottom of the door of the front side and remove the driver's Panel. 3. use the command

1997-2003 C5 Corvette doładowanego compressor system installation manual

C5 Corvette Compressor Installation manual doladowanego system.
Supercharger system doladowanego installation instructions:
1. Raise the vehicle on a hoist motor, using the factory recommended pick up points. You can find in the manual of manuals or shop owners for these locations. 2. remove the stock hood by disconnecting the electrical connector hood lamp, un-clipping, small gas charged shocks and remove hood screws four 13 mm socket wrench.

1995-1996 Dodge Avenger short Throw Shifter Setup Manual

Dodge manuals for 1995-1996 Dodge short Throw Shifter Setup Guide Avenger.
Short throw Shifter Setup instructions:
List of parts: 1 B and M short Throw Shifter, 1 B and M short Throw Shifter Pivot Pin, 1 Shift, 1 5/16 "-18 screw, 1 E-Clip (2 supplied 1 required), 2 washers, nylon, 1 tube, Loctite, 1 sheet of instructions.
The B and M short Throw Shifter was designed to work on most models 1995-1996

2005 Ford Focus 2.0 l nitrous Kit installation manual

Ford manuals for 2005 Ford focus 2.0 l nitrous Kit installation guide.
Nitrous Kit installation instructions:
1. by using standard removal tool can remove the stereo Ford, stereo. 2. unscrew the hexagon a/c controls, purchase ashtray, unplug the power loom and set aside the trim tile. Note When you extend each pipe. 3. measure 1 5/16 "down from the top of the trim audio unit and 1 1/8"

GMC Yukon XL Front bumper impact strip substitution bracket

GMC manuals GMC Yukon XL front bumper bar replacement brackets.
Front bumper impact strip bracket installation/removal instructions:
The process of deleting: 1. delete all associated panels and components. Important: do not remove any material in turn frames after you remove the parenthesis of the bumper. 2. remove the damaged bumper bracket.
The installation procedure: important:

1998 Honda Accord Coupe EX/LX signal Mirror Setup Guide

Honda manuals for 1998 Honda Accord Coupe EX/LX signal Mirror Setup Guide.
Signal Mirror installation instructions:
1. start with a door on the driver's side and bottom of the window. 2. remove the plastic cap on the inner side of the door. 3. remove the plastic cover from the corner of the window. 4. Remove the screw from the Centre of the armrest. 5. starting from the left, the

2000-2006 Hyundai Accent 1.3 L L4 air filter Element Setup Guide

Hyundai manuals for air filter L L4 2000-2006 hyundai Accent 1.3 installation manual.
1. the air inlet hose Unclip the. (Fig. 1) 2. unscrew the hexagon and remove the intake snorkel/resonator box from the vehicle. (Fig. 2) 3. remove the 3 screws, secure the field of air into the vehicle. (Fig 3) 4. Carefully lift the entire field of air from the vehicle. (Fig 4) 5. remove the breather hose from inlet hose. (Fig 5)

1997-2000 Jaguar 4.0 LV8 engines installation methods Manual

Jaguar manuals for 1997-2000 Jaguar 4.0 LV8 engines installation methods Manual.
Installation instructions for the method:
The Committee AERATechnical offers the following information concerning the main bearing installation methods for 1997-2000 caution the Jaguar 4.0 LV8 engines. The camera uses three different screw thread sizes and improper torque is then, for some of the bolts, the lower end of the engine may result.