Thursday, March 24, 2011

2009-2010 Cadillac CTS 3.0 L Airaid air intake Installation Manual

Cadillac manuals for 2009-2010 Cadillac CTS 3.0 l Airaid air intake installation manual.
Airaid air intake installation instructions:
1. disconnect the negative battery cable. Remove the engine and shock Tower includes, if so equipped, by simply pulling on them and move out of the vehicle. They again later in step 16. 2. A) Loosen the hose clamps for tube factory. B) disconnect the line and remove the breather tube factory. C)

2007 Chevrolet Suburban/Avalanche exhaust system setup guide

Chevrolet/Chevy manuals for 2007 Chevrolet Suburban/Avalanche exhaust system setup guide.
Exhaust system installation/removal instructions:
Note removing the exhaust system: with a used vehicle, we suggest penetrating

2004-2008 Chrysler 300 C exhaust system installation/removal Manual

Chrysler 300 C exhaust system installation/removal Manual.
Exhaust system installation/removal instructions:
Note removing the exhaust system: with a used vehicle, we suggest penetrating lubricant spray liberally applied to all exhaust fasteners, and allowing for a significant period of time for the chemical to lubricate the threads before attempting to disassemble. 1. Unbolt the clamps shown in Figure 1 is located just behind catalytic converters.

C4 Corvette roof installation guide

Corvette manuals for Manual installation of the roof C4 Corvette .
Roof installation instructions:
Design 84-early 86 roof installation-1. Make sure that the front cone/plate Assembly is loose enough to move manually. 2. set the roof of the car and tighten the screws of the rear of the Centre. If the bolts are difficult to start, please check again to make sure that the roof is centered and have a second person push toward the rear of the car roof to compress new weatherstrip. 3. Tighten the outer two rear Locator bolts on each side. Now is the rear part of the roof. 4. tighten the mounting bolts in front.

Dodge Avenger/Caliber/travel Cabin Air Filter installation manual

Dodge the manuals for the installation manual Dodge Avenger/Caliber/subsistence cabin air filter.
The cabin Air filter, the instructions for installation:
OE: 5058381AA, 5058693AA fits: Dodge Avenger (2008)-at the 2007 Dodge Caliber, Jeep Compass, Patriot 2009 Dodge journey size: 8 1/2 x 7 21/32 x 31/32 (215.9 x 24,6 x 194.5) Note: includes Imp charcoal regnated Media to control odour.
1. open the passenger-side door.

2007-2008 Ford Focus bumper Cover speed grille inserts installation manual

Ford manuals for 2007–2008 Ford Focus bumper grille inserts manual Cover speed installation.
Bumper Cover speed grille inserts installation instructions:
1. raise the front of the vehicle to gain access to the back bumper of holes. 2. remove the apron ABS, thereby removing all fasteners securing to cover the bumper and the underside of the vehicle. You can find the "pushing"

Installation manual 2010 Honda CRV-fog lamps

Honda manuals for 2010 Honda CRV Manual installation of front fog lamps.
Installation instructions for the fog-lamp:
1. make sure that you have the anti-theft codes for the navigation and audio (if available) and save the XM radio presets (if available). 2. Disconnect the negative cable from the battery. 3. remove the front bulkhead cover (seven clips). 4. remove the front bumper (four screws self-tapping,

2006-Up Hyundai Accent Sedan, bumper, Hood, Cap, Mirror Setup Guide

Hyundai manuals for 2006-Up Hyundai Accent Sedan , finish, bumper, Hood, Mirror Setup Guide.
Hood, finish, bumps, Mirror: installation instructions
1. spray the application area of Hood wetting agent. Remember to use liberally. 2. place the material in the hood. Line up the necessary before the squeegee. (Alignment (upper surface) is a film edge aligned to the edge of the Panel of the vehicle at a

Jaguar X 308 Bluetooth phone Setup Guide

Jaguar manuals for Bluetooth phone Setup Guide Jaguar X 308 .
Bluetooth phone setup instructions:
Basic stereo system connection factory in 1998 by 2002 XJ easy adapter for aftermarket website now handsfree Bluetooth. Remaining years and models are similar. Several have been successfully installed to take full advantage of Mute when calling the factory stereo line input to and output audio and mic factory. All required cabling there is in the centre console. Take a look at the schematic RT2